The short answer
Many homes can have a heat pump, but whether it will work well, and cost what you expect to run, depends on your house and how the system is designed. It is not simply a yes or no.
- Heat loss, your existing radiators and your hot water arrangements all affect suitability.
- You do not always need extensive insulation first, but a good design should explain why.
- Ask to see the heat-loss calculation, and compare quotes like for like.
What decides whether a heat pump suits your home?
- How much heat the home loses. A heat pump should be sized to your home’s heat loss. A draughty, poorly insulated house may need a larger system and cost more to run, while a well-insulated one needs less.
- Your radiators or underfloor heating. Heat pumps work most efficiently at lower flow temperatures, so some radiators may need to be larger, and some homes need other changes to the pipework.
- Hot water. Most systems use a hot water cylinder, so you need space for one.
- Outside space. An air source heat pump needs a suitable position for the outdoor unit, with consideration for noise and neighbours.
- How you use the home. Patterns of occupancy and heating influence the design and running costs.
Do you need to insulate first?
Not always. Insulation can reduce heat loss and may make a heat pump cheaper to run, but it does not follow that every house needs extensive work before one can be considered. A competent assessment should look at the building and the heating system together, and say whether any insulation, ventilation or damp issues should be dealt with first. My article on whether to improve insulation before solar or a heat pump goes into this in more detail.
Will it be cheaper to run?
That depends on how efficiently the system performs in your home and on the tariffs you pay for electricity and gas. Be cautious of any quote that gives a running-cost figure without explaining the assumptions behind it, and ask what efficiency it is based on.
Questions to ask an installer
- Is the design based on a room-by-room heat-loss calculation, and can I see it?
- Will my existing radiators work, or do any need replacing?
- What size is the hot water cylinder, and where will it go?
- Where will the outdoor unit be sited, and how has noise been considered?
- What are the expected running costs, and what assumptions are they based on?
- Are you MCS certified, and what guarantees come with the installation?
- What is included in the price, and what is not?
Grants and borrowing
Support for heat pumps changes, so check the current position before you decide. The government says a loan under the Warm Homes Loan Scheme can be combined with a grant of up to £9,000 through the Boiler Upgrade Scheme, subject to those schemes’ rules. I explain what to check before you borrow in my Warm Homes Loan Scheme guide.
Getting an independent view first
If you want an independent view of whether a heat pump is likely to suit your home, and what should come first, the Lite Touch Home Energy Report looks at your fabric, heating and plans together. It is not a heat-loss calculation or an installation design, which a heat pump installer will still need to provide.
Not sure where to start?
The Lite Touch Home Energy Report is an independent, plain-English starting point before you request quotes or commit to borrowing. No payment is taken when you enquire.
This article is general information, not financial advice. I do not recommend lenders, arrange finance or advise on whether you should borrow. Loan eligibility, rates and approval are decided by lenders. Jim Thomas Energy Consultancy provides independent energy advice and assessment for homeowners and property owners. Advice is based on the information available, with further investigation recommended where the condition or suitability of a property cannot be confirmed remotely.
